Skip to content

The in-app config editor

Clauster's dashboard can change configuration from the browser through two distinct surfaces, opened from buttons in the dashboard header:

  • Edit configuration (pencil icon) — edits Clauster's own clauster.yml through a fixed, fail-closed allowlist.
  • Manage Claude Code config (wrench icon) — manages the host's Claude Code configuration: CLAUDE.md, settings, permissions, hooks, MCP servers, subagents, skills, and plugins. This button only renders when the config_write trust tier is enabled — a disabled deployment ships no dead surface.

This page is the operator's guide to both. For what every key means, see the configuration reference — the field tables there are the single home for key-by-key detail.

Editing clauster.yml

The pencil button opens the Configuration modal. Fields are grouped into sections — General, Claude, Instance defaults, Direct Session (live-view), Logs, Reaper, Usage, Metrics, Observability, Notifications — with jump chips at the top and a search box that filters by label, key, or description. Each field renders as a typed control (toggle, bounded number, text, or a select with human-readable option labels), with its raw YAML key shown as subtext so you can cross-reference the file.

A bounded number carries its real range, and the editor checks that range before it sends the save. The input's min/max attributes only advertise the range and bound the spinner arrows — the save is a fetch, not a form submit, so a value you type is never enforced by the browser. The editor therefore compares it itself and refuses an out-of-range one with a message, rather than sending it and surfacing a 422 from the full-config re-validation. That covers exclusive bounds too: a timeout that must be greater than zero, not at least zero, is refused at zero — something min="0" alone cannot express.

A switch whose feature needs an optional dependency that isn't installed (Direct Sessions → the claustrum binary, notifications → apprise, the live terminal view → pyte) can't be turned on and shows a "Requires … — run clauster deps install …" note, so you're told what a feature needs at the moment you'd enable it rather than discovering it dormant later. Availability is resolved exactly the way the runtime resolves it (including a configured claustrum.binary), so a dependency that is present never greys out its switch.

Only the Tier-A allowlist of day-to-day operational fields appears here:

Section Editable fields
(top-level) log_format
api openapi_enabled
claude min_version, agents_json_poll_interval_seconds, startup_grace_seconds, auto_enable_remote_control, resume_recap, resume_recap_max_chars, launch_mode, pty_screen_enabled
instance_defaults spawn_mode, permission_mode, verbose, session_name_prefix, capacity, max_bridges
claustrum enabled, socket_path, spawn_timeout_seconds, keep_children, request_timeout_seconds
logs bridge_log_max_size_mb, keep_rotated, redact_session_url, strip_ansi_in_stream, retention_max_age_days, retention_max_files, retention_max_total_mb
reaper ui_enabled
usage mode, currency, currency_symbol, fx_rate, token_total_includes_cache, show_cost
metrics enabled, normalize_cpu, show_disk, sample_interval_seconds, poll_seconds
observability prometheus_enabled
notifications enabled, browser_enabled, notify_on_crash, notify_on_ready, notify_on_stop, notify_on_permission, notify_on_session_end, notify_on_reconnect_failed

The allowlist's source of truth is EDITABLE_FIELDS in src/clauster/config_editor.py (the table above is generated from it); GET /api/config returns it, so the UI only renders fields it can actually write.

What it deliberately won't edit

The allowlist is a structural security boundary, and that is a feature: anything that is a secret, an auth gate, a network-bind decision, a binary path, a structural boot setting, or a code-executing capability is excluded and enforced fail-closed in two ways:

  • Never read back. The editor's read API serializes only allowlisted values, so a secret, credential hash, or bind value never reaches the browser in the first place — redaction is structural, not a post-filter.
  • Never written. A save carrying a non-allowlisted key (an auth.* field, say) is rejected with 400 at the allowlist — never silently dropped — and the merged result of an allowed edit is re-validated by constructing the full ClausterConfig before any disk I/O, so a value that fails the same fail-closed startup validation is refused with 422.

Concretely, that excludes — for example — auth.* (passwords, tokens, the enabled master switch), host/port, projects_root, the projects map, config_write.* / login_shepherd.* (RCE / account-auth surface), the secret URL lists (webhooks.urls, notifications.urls), auth trust lists (auth.allowed_origins, auth.reverse_proxy.trusted_ips), and the binary paths (claude.binary/claustrum.binary).

If you can't find a field in the editor, that is by design, not a gap. Edit clauster.yml on the host (or use the CLI) instead. That same host access also allows the corresponding comma-separated CLAUSTER_* environment override for the list keys above — both require the host, which is exactly the boundary the editor's exclusions draw.

Advanced settings (step-up re-auth)

At the bottom of the Configuration modal, an Advanced settings section exposes a second, operational-but-sensitive allowlist (Tier-B): the clone.* and webhooks.* guardrail knobs, including rows editors for clone.allowed_schemes / clone.allowed_private_cidrs and a checkbox-per-event editor for webhooks.events. It appears only when config_write.enabled is on, and saving requires you to re-enter your password first — a short-lived "step-up" unlock, separate from your login session. Deployments without a password set (reverse-proxy or token-only auth) see a note instead of the unlock form; set one with clauster hash-password. The Tier-B allowlist:

Section Advanced fields
clone enabled, allow_private_hosts, allowed_schemes, allowed_private_cidrs, timeout_seconds, max_mb
webhooks enabled, timeout_seconds, block_private_targets, events

Its source of truth is TIER_B_FIELDS in the same module; GET/PUT /api/config/advanced back the panel.

How a save is applied

Every save of clauster.yml (Tier-A and Advanced alike) follows the same fail-closed pipeline — a bad edit never reaches disk:

  1. Validate. Disallowed keys are rejected (400); the merged config must re-validate as a full ClausterConfig (422 otherwise).
  2. Lost-update guard. If the file changed on disk since the editor loaded it (an external edit, or a concurrent save), the write is rejected with 409 instead of clobbering the newer content.
  3. Backup, then atomic replace. The previous file is copied to a timestamped clauster.yml.bak-* (the five newest are kept), then the new content is written to a same-directory temp file and atomically swapped into place. The edit is rendered onto a comment-preserving round-trip, so your inline YAML comments survive.

Saves never live-reload

The running process keeps its startup configuration until it restarts. After a save, the editor shows "Saved — restart Clauster to apply".

Restarting from the dashboard

The Configuration modal's Restart Clauster button applies saved changes without shelling into the host (#483). It re-executes the process in place: the same PID, a re-read of the config, and — because the service unit is never stopped — running bridges and hosted sessions survive the swap and are reattached on startup. The confirm dialog tells you how many sessions are running and that they keep running and reconnect; the page briefly disconnects, polls /healthz, and reloads once the restarted process binds.

For restarting from the shell under systemd (and the KillMode caveat that makes it safe), see Operations → the restart caveat.

Managing Claude Code config

The wrench button opens Manage Claude Code config — a separate modal over the gated /api/config-write/* surface for the host's Claude Code configuration (not Clauster's). It exists only when config_write.enabled is on; the User scope additionally requires config_write.allow_user_scope.

Common mechanics across the modal:

  • Scope toggle — User / Project / Local, with a project picker for the project-level scopes. Subagents have no project-local scope (Claude Code has no local directory for them). The Skills tab has a Local scope for skill visibility only, because Claude Code has no local skills folder.
  • Typed confirmation — every document save asks you to type the scope name; destructive list actions (delete, reset, plugin install) have their own typed confirms.
  • Secret masking — the Settings, MCP, Hooks, Subagents, and Skills surfaces, and the autoMode box and read-only view on the Permissions tab, mask secret-shaped values on read. The MCP surface also masks every env and headers value, the headersHelper command, and the strings in oauth, whatever their key names. It also masks the query values, the fragment and the token-like path segments of a server url. A masked value left untouched keeps the stored secret on write. If Clauster cannot match a mask to its stored value, it refuses the save and writes nothing. The CLAUDE.md surface and the permissions rules return the raw content, because they round-trip the exact text on write. For what the Subagents and Skills editors mask, see Masked values in subagent and skill files. For what the Hooks tab masks, see The Hooks tab. The Plugins surface is read-only for these values, and it masks them too. See Plugins and marketplaces.

The surface tabs:

Tab What it manages
CLAUDE.md The scope's CLAUDE.md memory file, as plain text.
Settings settings.json — a row for each key, typed by its value, with a Raw JSON escape hatch, plus a read-only merged ("effective") view showing which scopes each value comes from. See The Settings tab.
Permissions The permissions object, as rows or raw JSON, and the auto mode classifier rules (autoMode). See The Permissions tab.
Hooks The hooks key, as rows or raw JSON.
MCP MCP server definitions (add / edit / delete), as fields or raw JSON, plus per-server approvals for committed .mcp.json servers — Approve / Reject each, or reset all choices behind a typed confirm.
Subagents Subagent definition files: list, edit, create, delete.
Skills Skills: list, a per-skill SKILL.md editor, create, delete, and the visibility of each skill (skillOverrides). See Skill frontmatter checks and Skill visibility.
Plugins Installed plugins (install / uninstall / enable / disable / update) and the marketplaces they come from (add / remove).

MCP server definitions

The MCP tab edits each server in one of two modes. Use the Fields and Raw JSON buttons above the definition to switch between them:

  • Fields is the default. Select the type first. The form then shows the fields for that type: command, args and env for stdio, or url, headers and headersHelper for http, streamable-http, sse and ws. The form also shows the oauth fields (clientId, callbackPort, authServerMetadataUrl and scopes) for http, streamable-http and sse, and timeout and alwaysLoad for every type. Clauster builds the JSON entry from the form, so you do not write JSON for a typical server.
  • Raw JSON shows the server as one JSON object, in the same shape as an mcpServers entry in .mcp.json, without the server name around it. Use it for the fields that the form does not show, such as role, tools or oauth.xaa. A server that has such a field opens in Raw JSON, and a note names the fields. A value with a line break, for example a python -c script in args, also opens in Raw JSON, because each field is one line. So does an env or header name that is empty or has spaces around it, because the form trims each name.

The switch from Fields to Raw JSON is refused while an env or header row has a value but no name, or shares its name with another row. One entry cannot hold these rows, so the switch would lose values. A note names the rows. The same rows also keep Save off.

In both modes, a masked value shows as ********. A server url is masked as the Hooks tab masks an http hook URL: every query value, the fragment, and each path segment or query key that looks like a token show as ********. The scheme, the host, the port, the plain path, and the plain query keys stay visible, for example https://mcp.example.com/v1?key=********. A ws or wss URL is masked in the same way. A URL with a user name or password, or a ${...} reference, shows as one ********. A URL path segment or query key shorter than 20 characters is not masked if it has fewer than 8 letters and digits, or only letters, or only digits. Do not put a secret there.

If you leave the mask in place, the save keeps the stored value. A url that holds a mask keeps the stored URL only when every visible character of it is unchanged. Clauster compares the text exactly. If you change any part of such a URL, for example the host, the path, or a query key, the save is refused (422). Type the full URL again. If you change the type or a URL of a remote server, or the command or args of a stdio server, the save cannot keep a masked value (see the list below). The save also cannot keep a mask that has no stored value behind it, for example in a row that you renamed. In both cases, the editor names each masked value and keeps Save off until you type each of these values again.

The editor accepts each field that the Claude Code MCP documentation lists for a transport, and each field that the installed claude CLI reads and keeps for that transport even when the documentation does not list it:

type Required Optional
stdio, or no type command args, env
http (alias streamable-http), sse url headers, headersHelper, oauth, request_timeout_ms, tools, toolPermissions, displayName, discoveryCache
ws url headers, headersHelper

Every transport also accepts timeout (milliseconds, a positive integer), alwaysLoad and bareElicitationCapability (both true or false), and role (only "comms"). The oauth object accepts clientId, callbackPort (1 to 65535), authServerMetadataUrl (an https:// URL), scopes (a space-separated string) and xaa (true or false). On http and sse, tools is a list of {"name": …, "permission_policy": …} objects, where the policy is always_allow, always_ask or always_deny. toolPermissions maps a tool name to allow, ask or blocked.

The editor refuses the whole entry when a field is unknown or has the wrong type. It also refuses these values, because Claude Code refuses, skips or ignores them:

  • The transport key, and env on an http, sse or ws server. Earlier Clauster versions accepted both, but Claude Code ignores them. Use type instead of transport. When Clauster loads a stored server that has them, it converts the server (see below).

  • A server name with a character other than a letter, a number, a hyphen or an underscore, or a name that starts with a hyphen. Earlier Clauster versions accepted a dot. You can still delete a stored server with a dot in its name, but a save that includes it is refused. Claude Code skips that server.

  • A masked value (********) when nothing is stored behind it, for example in a new server that you copied from the masked view of another one. Type the real value instead.
  • A masked value in an http, sse or ws server when you changed its type, or any character of its url or of another url field such as oauth.authServerMetadataUrl. Clauster compares the text exactly, so a change of letter case, an added default port or a new query string also counts. Clauster does not send a stored credential to a new destination. Type the credential again.
  • A masked value in a stdio server, usually an env value, when you changed its command or any element of its args, including their order. Clauster compares the text exactly. It does not hand a stored value to a new command. Type the masked values again. A change to an unmasked env value keeps the other masked values.
  • A reserved name, such as workspace, claude-in-chrome or computer-use.
  • An entry with a url and no type. Claude Code reads such an entry as a stdio server and skips it.
  • "type": "sdk", "sse-ide", "ws-ide" or "claudeai-proxy". Claude Code registers these servers at runtime and refuses them in a configuration file.

When the MCP tab loads a stored server that has a field Claude Code ignores, Clauster converts the server in the editor and shows a note above the list that names each change. It does not change the file until you save:

  • If type is not set, a transport value of stdio, http, streamable-http, sse or ws becomes type. If type is set, Clauster removes transport.
  • Clauster removes env from an http, sse or ws server. Claude Code never read these values, so nothing is lost. The note gives the number of values.

To write the fix, open the server and save it. You do not have to edit it first. A save through the API that still has these fields is refused, and the error message tells you to reload the server and save it.

Clauster stores a headersHelper command but never runs it. Claude Code runs it when it connects to the server. For a server in .mcp.json or at local scope, Claude Code runs it only after you accept the trust dialog for that project.

An OAuth client secret is not part of the entry. Claude Code keeps it in the system keychain or a credentials file. The POST /api/config-write/mcp/server route takes an optional client_secret for an http or sse server. The dashboard does not send one. Clauster passes it to claude mcp add-json --client-secret through the MCP_CLIENT_SECRET environment variable, never on the command line. The route refuses a client_secret for an entry that holds a masked value, because Clauster then writes the file directly and cannot deliver the secret. To change the secret of a stored server, delete the server and add it again with every value typed in.

Three entries can look broken when they are not. The Source badge on each row tells the first two apart:

  • A built-in subagent is listed with no description, and cannot be edited or deleted. Claude Code compiles general-purpose, explore, plan, claude, statusline-setup and claude-code-guide into the CLI, so there is no file anywhere to edit. Every install shows these six, at both scopes, before you add anything of your own. You also cannot create a subagent with one of these names in Clauster.
  • A plugin-provided subagent is listed, but cannot be edited or deleted. A plugin owns that file, so Clauster refuses to change it. To change it, change the plugin. When the plugin supplies it as a symlink, Clauster never follows the link, so the description is blank as well.
  • A skill Clauster cannot read still appears, carrying an error in place of the missing information. One unreadable skill never hides the others.

The Settings tab

The Settings tab edits each top-level key of the settings file for the scope, except the keys that another tab writes. These are permissions and autoMode (the Permissions tab), hooks (the Hooks tab) and enabledPlugins (the Plugins tab). A save that names one of them is refused (422), and the error names the tab to use. Clauster checks the shape of env only. It does not run or interpret any other value. Claude Code reads the values when a session starts.

The tab has two modes, Rows and Raw JSON. In Rows mode, each top-level key of the file is one row, and the editor follows the JSON type of the value:

  • A Boolean is a switch.
  • A number is a number box. A save sends a number, and an empty box blocks the save.
  • A string is a text box. When the settings reference names values for the key, for example tui or theme, the box suggests them. To see all the suggestions, clear the box, then press the Down arrow key. You can type any value, and it saves as you typed it. A value that is not one of the known values shows a warning on its row and in a note at the top of the tab. The save is not refused. The known values also cover a custom theme (custom:<slug>) and a timeFormat pattern that holds a %.
  • An object, a list or null shows its value, its type and an Edit in Raw JSON button. A save writes it back unchanged.
  • env has its own table of variables below the rows.

The known values are suggestions only. Clauster copies them by hand from the settings reference (read on 2026-11-05) and does not check them against the installed claude. They can lag behind Claude Code: a value that a newer Claude Code reads can show the warning, and a misspelled value saves too. The warning is the only check that Clauster makes on these values.

Each value saves with the JSON type that it had when it loaded, unless you change it. For example, the string "1" stays a string. To add a key, type its name in Add a key, or pick one of the suggestions, then pick the type of the value: text, true/false or number. The key suggestions are the documented keys of one value that Claude Code reads at the current scope. When you type a documented key, the tab selects its type for you, and you can change it. A new switch starts off, and a new number box starts empty. A documented key that holds an object or a list is added in Raw JSON, and the tab says so. Clauster sends any other name as you typed it. If you type a key that another tab edits, the tab names that tab and links to it. The browser does not decide whether Claude Code reads a key at a scope. The server checks every key when you save, and the error gives its reason. Raw JSON shows the same keys as JSON. A switch between the two modes keeps every value. While a number box is empty or two env variables have the same name, the tab stays in Rows mode, and a note above the rows says why.

No other tab writes these keys in a settings file, so the Settings tab shows them:

  • enabledMcpjsonServers and disabledMcpjsonServers. The MCP tab shows an approval from a settings file as read-only, with a settings badge. Change it here.
  • skillOverrides. The Skills tab has no editor for it yet.
  • disabledPlugins. Claude Code 2.1.318 does not read this key. If a file still has it, remove it here.

Every env value shows as ********. If a hand-edited env is not an object, it shows as one ********, and the save is refused (422, "'env' must be an object") until you replace it with an object in Raw JSON. The value of each credential helper shows as ******** too, because the command can hold the credential that it prints. The helpers are apiKeyHelper, awsAuthRefresh, awsCredentialExport, gcpAuthRefresh, otelHeadersHelper and proxyAuthHelper. Other values show as ******** when they look like a secret. If you leave a mask as it is, the save keeps the stored value. If a mask no longer matches a stored value, the save is refused (422) and the settings file is not changed. This occurs when you rename an env variable that shows a mask, or when you move or remove an entry of a list that holds a mask. Type the real value again. All masks look the same, so to change one masked entry of a list, type the real value of every masked entry in that list.

The settings reference gives each key a scope. Claude Code reads some keys only from user settings, only from user and local settings, only from managed settings, or only from ~/.claude.json. Clauster refuses a save that puts such a key at a scope where Claude Code ignores it (422), and the error names the scope that works. For example:

  • skipAutoPermissionPrompt, modelPicker and spellcheck work only at User scope.
  • useAutoModeDuringPlan and skipDangerousModePermissionPrompt work at User and Local scope.
  • strictKnownMarketplaces and allowManagedHooksOnly work only in managed settings. Clauster never writes managed settings.
  • diffTool and autoConnectIde belong in ~/.claude.json, which the Claude Code /config command writes.

If a file already holds such a key, remove the key (its Remove button in Rows mode, or Raw JSON) before you save the file again at that scope. The auto mode key disableAutoMode and the hook keys disableAllHooks, allowedHttpHookUrls and httpHookAllowedEnvVars work in every settings file, so the tab accepts them at every scope.

The settings reference gives bashEditDiffEnabled and sandbox.allowNestedUserNamespaces User scope, but Claude Code also reads false for them from a project or local file, so the tab accepts false at every scope. Of the three files, Claude Code reads true for them only from user settings, so the tab refuses true at Project and Local scope. If a project or local file already holds true for one of them, change it to false or remove it before you save. Clauster checks no other values, so it does not refuse a mask entry of sandbox.credentials.envVars in a project file, although Claude Code drops that entry.

Some keys are Desktop-only: only Claude Desktop reads them, and the Claude Code CLI ignores them. The tab keeps the scope that the settings reference gives each one. sshConfigs works at User scope only. sshHostAllowlist, browserExternalPageTools, disableBrowserExternalNavigation, disableDesktopLocalSessions and disableMobileSimulatorTools work only in managed settings, so the tab refuses them at every scope. The refusal says that only Claude Desktop reads the key. If the file that you load holds a Desktop-only key, a note above the editor names it, and the merged view leaves it out.

At Project and Local scope, the merged ("effective") view shows the value that Claude Code applies from the three files. Local settings override project settings, and project settings override user settings. Claude Code merges an object such as env key by key and combines the lists from each file. A plain value from a higher scope replaces the lower one, and fallbackModel comes whole from one file. A key or value that a file is not allowed to set is left out. When more than one file makes up a value, the From column names each file. Managed settings and the --settings flag are not part of the view.

If a scope fails to load, the tab clears its rows. A save therefore cannot write the values of the scope that you looked at before into the new scope.

The Permissions tab

The rows editor shows every key that the Claude Code settings reference documents for the permissions object:

  • The rule lists allow, deny and ask, and the directory list additionalDirectories, which gives Claude file access outside the directory that the session starts in. Clauster stores each entry as you type it. It never parses a rule or resolves a path.
  • defaultMode. The list offers default, acceptEdits, plan, dontAsk, manual (an alias for default), and auto at User scope only.
  • Four switches. A checked box writes true for blockReadsOutsideWorkingDirectories and blockWritesOutsideWorkingDirectories, and "disable" for disableBypassPermissionsMode and disableAutoMode.

A shape that the rows cannot show opens in Raw JSON. A save with an unknown key or a wrong type is refused whole, with a 422 that names the key.

bypassPermissions is not offered, and a save that sets it as defaultMode is refused at every scope, so Clauster never writes it. A hand-written bypassPermissions in User or managed settings takes effect for a session that starts with No forced mode (inherit). For this reason, a project offers inherit only when it sets allow_bypass_permissions: true. See the bypassPermissions footgun gate.

At User scope, the box under the rows edits autoMode, the rules for the auto mode classifier. autoMode is a top-level key next to permissions, so the Settings tab does not show it. The box takes a JSON object with the lists environment, allow, soft_deny and hard_deny, and the Boolean classifyAllShell. Put the entry "$defaults" in a list to keep the built-in rules at that position. A list without it replaces the built-in rules for that section. A soft_deny or hard_deny list without "$defaults" removes the built-in blocks, including the block for force push and the data-exfiltration rule. Run claude auto-mode defaults to see the built-in rules. See Configure auto mode.

Claude Code reads autoMode from User settings, managed settings and the --settings flag, and it reads defaultMode: "auto" from User and managed settings. It ignores both in a project or local settings file, so that a repository cannot add its own classifier rules. For this reason, the tab has no autoMode box at Project or Local scope:

  • If the file has no autoMode block, the tab says that Claude Code reads autoMode only from User scope, and a Switch to User scope button opens the box there. If config_write.allow_user_scope is off, the tab has no User scope, so it tells you to edit ~/.claude/settings.json on the host instead.
  • If the file has an autoMode block, the tab shows it read-only, masked as below, and marked as ignored by Claude Code. Remove it marks the block for removal (Keep it undoes that). Type the scope name and press Save to remove the autoMode key from the file. The save leaves every other key in the file as it is.

A save at Project or Local scope that sends a non-empty autoMode or defaultMode: "auto" is refused, and the error names User scope.

If the text of an autoMode entry holds a secret-shaped value anywhere, the entry shows as ********. A secret-shaped value is a URL with a user name or password, a ${...} reference, or a key: value line with a secret-shaped key. Leave the mask to keep the stored entry. You can add, remove or move the other entries around a mask. If a list still holds masks but their number no longer matches the number of masked entries on disk, the save is refused. Restore the masks as they loaded, or type the full entry again. If you remove every mask from a list, the save is accepted, and it deletes those entries.

Masked values in subagent and skill files

The Subagents editor shows each secret value in the frontmatter as ********. Each field is masked as the tab that owns its shape masks it:

  • In an inline mcpServers definition, every env and headers value, a headersHelper command, a URL with a user name or password, and the query values and token-like path segments of a url are masked, as on the MCP tab. A server name is not a secret, so a server called oauth-gw keeps its type and the plain parts of its url visible.
  • In hooks, the parts of a hook URL and the headers values that the Hooks tab masks are masked.
  • Every non-empty env value is masked.
  • In every field, a value with a secret-shaped key, a ${...} reference, or a URL with a user name or password is masked.

The Markdown body after the frontmatter is never masked or changed. Comments in the frontmatter are not masked either. Do not put a secret in the body or in a comment. If the frontmatter is not valid YAML, the editor cannot read its fields. It then masks the frontmatter line by line, as the Skills editor does, and that misses a secret under a key that does not look secret. A masked value in such a file cannot be kept, so type the real values when you repair it. The file keeps its line endings. If the file holds masked values and its frontmatter is valid YAML only after Claude Code adds quotes to some values, the editor shows those values with the quotes, and a save writes them with the quotes.

If you leave a mask in place, the save keeps the stored value. The save is refused, and nothing is written, in these cases:

  • A mask with no stored value behind it, for example in a new file, under a renamed key, or in a server that you renamed.
  • A masked value in an http, sse or ws server when you changed its type or any character of a URL in it. Clauster compares the URL text exactly and never parses it.
  • A masked env value in a stdio server when you changed its command or any element of its args.
  • A masked hook value when the Hooks tab rules cannot keep it.

Type the real value again to save the change. If a secret is on a value with a YAML anchor, an alias, or a merge key, or inside an ordered map or a set, the editor cannot mask it in place. It then shows a note and not the file. Edit that file on the host.

The Skills editor masks each file line by line: a key: value line with a secret-shaped key, a ${...} reference, or a URL with a user name or password. The body of SKILL.md is masked too, because skills often hold commands.

In the frontmatter of SKILL.md, the editor also masks every url value, for example the url of a server in mcpServers or of an http hook in hooks. It masks the value as the Hooks tab masks a URL. Each query value, the fragment, and each token-like path segment show as ********. The scheme, the host, the port, the plain path, and the plain query keys stay visible, for example https://mcp.example.com/v1?key=********. A URL with a user name or password, or with a ${...} reference, shows as one ********. If the value covers more than one line, holds an escape, or has an anchor or a tag in front of it, each line of the value shows as one ********.

The editor decides this view from the text of a file, not from its name. Every file of the skill that starts with a frontmatter block gets it. So SKILL.md gets it under every path that reaches it, for example ./SKILL.md or a link, and a copy of it gets it too. Only the frontmatter block gets the view. A url line in the Markdown body, or in a later document of a YAML file, gets only the line masks above. A save refuses (422) a file key that names SKILL.md under another spelling or case, for example ./SKILL.md, skill.md or SKILL.md., because macOS or Windows opens SKILL.md for it. Send the file once, as SKILL.md.

Some URL text is not masked. A path segment or query key shorter than 20 characters is not masked if it has fewer than 8 letters and digits, or only letters, or only digits. Do not put a secret in them.

If Clauster cannot read a frontmatter block the way Claude Code reads it, every line of the block shows as ********. This applies only to a block that holds the text url (in any case), http:, https:, ws:, wss: or a backslash. A block without any of them gets only the line masks. These are the cases:

  • The block is not valid YAML to Clauster.
  • It holds --- before its closing fence.
  • It holds a line break that only YAML 1.1 knows.
  • Only Claude Code reads its opening fence.
  • It is valid only after Claude Code re-quotes it.
  • It holds syntax that YAML 1.2 refuses, for example a quoted value that continues on a line that starts at column 0.
  • It is larger than the 256 KiB file cap.

For SKILL.md, a save of such a file is refused, except when the frontmatter is valid only after Claude Code re-quotes it. To change the file, type the whole frontmatter again or edit the file on the host.

A masked line keeps its stored text on save only when every other character of the line is unchanged. For a frontmatter url, the scheme, the host, the port, the path, and every query key must be unchanged, and no query parameter can be added. Otherwise the save is refused (422) and nothing is written. A kept line must also stay where the editor masks it. A masked url line that you move into the Markdown body is refused, because the body would show its token. Each stored line is kept at most once, in order, so a copied masked line is refused. If two stored lines look the same when masked, a save that adds or removes one of them is refused too. A masked line in the frontmatter is kept only while hooks and mcpServers are unchanged. Otherwise a changed URL on another line receives the stored credential. A new line that holds ******** is refused, so type the real value.

A mask hides a stored value, but not its length. A refusal about a masked value never names a size, but repeated saves near a size limit can show how long a masked value is.

Subagent frontmatter checks

The Subagents editor checks the frontmatter of a subagent file before it saves the file. It checks each field in the Claude Code frontmatter reference. It accepts every value that the installed Claude Code (2.1.318) reads for that field, also a value that the reference does not list. It refuses a value that Claude Code rejects or ignores. If one field fails, Clauster refuses the whole save and writes nothing.

Clauster reads YAML 1.1 and Claude Code reads YAML 1.2, so a few unquoted spellings mean different things to the two. Clauster refuses the ones it can detect. For example, write true, not yes. Write a plain decimal number, not 010, 0b101 or 1_000. Quote a value that must stay a string. See YAML spellings that Clauster refuses. Clauster never runs a hook command and never connects to an MCP server from this editor.

  • name must be lowercase letters, digits and hyphens, at most 239 characters, and the same as the name of the file. The name is also the file name, so this rule is narrower than the Claude Code rule. A file with a longer or other name does not show in the list.
  • memory, color and experimental.cacheTtl accept only their listed values, written exactly as listed.
  • effort accepts a level name in any case, the alias med, or an integer. isolation accepts worktree and also remote, which Claude Code reads but does not document.
  • maxTurns and autoCompactWindow accept a number or a string that Claude Code reads as a whole number, for example 200000, "200,000" or 2e5. autoCompactWindow must be from 100000 to 1000000. Do not write 200k: Claude Code reads it as 200, which is out of range.
  • background and omitClaudeMd accept true and false, also as quoted strings. They refuse yes, no, on and off: Claude Code reads those as text and ignores them.
  • tools must name at least one tool. disallowedTools refuses a * entry, because Claude Code then applies no denylist at all.
  • mcpServers must be a list. Each item is the name of a server that you configured already, or one name: definition object. Claude Code reads only the list form and ignores a mapping. See Inline MCP servers for the checks on a definition.
  • permissionMode accepts manual as an alias for default. It refuses bypassPermissions, as every config-editor surface does. See the bypassPermissions footgun gate.
  • A field that is not in the reference is saved as written. Claude Code ignores a field that it does not recognize. The one exception is env: Clauster still refuses an env that is not a map of names to plain values.

If you open a subagent file that writes mcpServers as a mapping, the editor shows it already converted to the list form, with a note above the text. The file on disk does not change until you save. Read the converted text, then save to write the list form. The conversion only changes the indentation of the mcpServers block, so every value and comment stays as you wrote it. If the editor cannot convert the block safely, it shows the file as it is, and the save tells you to rewrite mcpServers as a list. Two examples are a mapping written on one line, such as mcpServers: {github: {...}}, and two servers with the same name.

Inline MCP servers

Claude Code reads an inline server definition in the same shape as an entry in .mcp.json. The Subagents editor therefore checks each definition with the field rules of the MCP tab, which MCP server definitions describes. It accepts the same fields for each transport. It refuses the same values, for example transport, env on an http, sse or ws server, a url with no type, and "type": "sdk". The YAML spelling rules above also apply to the true or false fields and the number fields of a definition, for example alwaysLoad and timeout. Quote a text value that looks like a number, for example env: {PORT: "1e3"} or args: ["0o17"]. Claude Code reads the unquoted value as a number and skips the server, so the editor refuses it.

The name rule is not the same as on the MCP tab. Claude Code accepts any inline server name that is not reserved, so the editor accepts a name with a dot, a space or a leading hyphen. The editor refuses these items, because Claude Code skips them:

  • A reserved name, such as workspace, claude-in-chrome, computer-use, Claude Preview or Claude Browser.
  • An item that defines more than one server. Write each server as its own - name: item.
  • Two inline servers with the same name. Claude Code connects only one of them.

If an inline server in the file has transport, or has env on an http, sse or ws server, the editor converts it as the MCP tab does. The note above the text names each change. The file on disk does not change until you save.

  • If type is not set, a transport value of stdio, http, streamable-http, sse or ws becomes type. If type is set, Clauster removes transport.
  • Clauster removes env from an http, sse or ws server, with the lines under it. Claude Code never read these values. The note gives their number.

Only those lines change, so every other value and comment stays as you wrote it. If the editor cannot convert a server safely, it shows the file as it is, and the save tells you what to change. An example is a definition written on one line, such as - srv: {transport: sse, url: ...}.

A file with the name of a built-in subagent, such as claude.md, overrides that built-in in Claude Code. The list shows the file as a read-only row next to the built-in row. Clauster does not edit or delete that file, so change it on the host.

The Hooks tab

The Hooks tab edits the hooks key of the settings file for the scope. It accepts every hook event, every matcher form, every hook type, and every handler field that the Claude Code hooks reference documents. It also accepts the fields that the Claude Code CLI reads but the reference does not list: rewakeMessage, rewakeSummary, and cloud. Any other field for that hook type stops the save with a validation error (422), and nothing is written. A timeout must be a number of seconds above 0, as the CLI requires. Clauster stores each hook as data and never runs it. It does not run a command, send a request to a URL, call an MCP tool, or send a prompt to a model.

In Rows view, each hook has two lines. The first line holds the event, the matcher, and the type. The second line holds the handler inputs of the selected type and only those, then the timeout and the Remove button.

Type What Claude Code does when the hook fires Handler inputs
command Runs a shell command Command
http Sends the event data as an HTTP POST to a URL URL
mcp_tool Calls a tool on a configured MCP server Server and tool
prompt Asks a model to allow or block the action Prompt
agent Starts a subagent that checks a condition Prompt

If any hook at the scope uses another field, for example headers, args, async, model, or an MCP tool input, the whole tab opens in Raw JSON. The same happens if any value contains a line break, because a row cannot show it.

An http hook sends data off the host, so the tab shows where the data goes: the scheme, the host, the port, the plain path segments, and the plain query keys of its URL. These parts of the URL show as ********:

  • user:password@ credentials.
  • Path segments and query keys that look like a token: a ${VAR} reference, a segment of 20 or more characters, or a segment whose letters and digits number 8 or more and mix both, with punctuation such as ;, : or = not counted (for example the three segments after /services/ in a Slack webhook).
  • Every query value (for example ?token= or ?sig=), and the fragment.
  • The whole URL, if it contains a tab or a line break, if its port is not a number, or if it is not a valid http or https URL.

Every non-empty headers value also shows as ********, and so do secret-shaped values in an MCP tool input.

If you leave a mask in place, the save keeps the stored value. These rules decide when Clauster keeps it:

  • The URL, the headers, and the input must be unchanged, including every visible part of the URL. If you change any of them, type every masked value in that hook again. You can change other fields, for example timeout, without retyping.
  • If several hooks at the scope send to one destination with different masked values (for example two Slack webhooks), Clauster keeps them only as a set. Each hook keeps its own value when the hooks come back exactly as they were read, in any order. A save that changes any field of one of them (the timeout too), adds or removes one, or moves one to another event or matcher needs every masked value among them typed again.

Otherwise the save is refused (422) and nothing is written. These rules stop a stored token from going to a new host or path, or into a hook that you edited. If you edit a hook until it is identical, mask for mask, to another stored hook with the same URL, it becomes a copy of that hook. Clauster cannot tell the text ******** in any other hook field from a mask, so a save that holds it there is also refused. Change that value to save.

Some secrets are not masked. The tab does not mask a command, its args, a prompt, a model, an if rule, a statusMessage, or a matcher. A URL path segment or query key shorter than 20 characters is not masked either if it has fewer than 8 letters and digits, or only letters, or only digits. Do not put a secret in them. For an http hook, put the secret in a header as a $VAR that allowedEnvVars lists.

Clauster treats a hook that refers to CLAUDE_PLUGIN_ROOT in any field as a plugin hook. While one is in the settings file, every save of the Hooks tab at that scope is refused (422). Remove it in Raw JSON. To change a plugin hook, change the plugin.

The disableAllHooks, allowedHttpHookUrls, and httpHookAllowedEnvVars settings are top-level keys, not part of the hooks key, so the Hooks tab does not edit them. Edit them on the Settings tab.

Plugins and marketplaces

The Plugins tab runs the claude plugin command on the host for every change. For enable, disable, install, update, uninstall, and marketplace add and remove, Clauster passes --scope with the scope you chose, so one change never reaches a second settings file. The marketplace Update button is the exception: claude plugin marketplace update takes no --scope, because a marketplace's checkout is shared by every scope and project. An update therefore refreshes that marketplace for every project on the host, not only the one you selected. The commands, flags and settings below were checked against Claude Code 2.1.318. The scope rules and the update results below were checked against Claude Code 2.1.319.

  • Each plugin row shows the scope that the plugin is installed at. The plugin list holds every install on the host, at every scope, also the installs of other projects. Claude Code updates or uninstalls a plugin only at the scope (and project) where it is installed. At any other scope it refuses, for example with "Plugin is not installed at scope project". So the tab shows Update and Uninstall only on a row that is installed at the scope and project you are looking at.
  • Enable and Disable also work from a scope that outranks the install scope. For a User-scope plugin, they work at Project and Local scope. For a Project-scope plugin, they work at Local scope of the same project. Claude Code then writes the plugin in enabledPlugins of that project's .claude/settings.json (Project) or .claude/settings.local.json (Local). The value overrides the lower scope for that project only, and the file of the install scope does not change. Claude Code refuses the other direction, for example a Local-scope plugin at Project scope.
  • A plugin that is installed at another scope is read-only for every other action. Its row tells you where it is installed, and a link switches the editor to that scope (and to its project, when the project is under projects_root). The link to User scope shows only when config_write.allow_user_scope is on. A row that has no scope, or the Managed scope, offers no action.
  • Update says what it did. Clauster reads the plugin list before and after the update. It then shows the version change ("Updated x from version 1.0.0 to version 1.1.0."), or "already up to date" with the version. The marketplace Update reads the marketplace's own plugin list (the marketplace.json file in its checkout) before and after. It then shows whether that list changed, how many plugins the marketplace now offers, and which names were added or removed. If a read after the update fails, the message says that the update ran and that Clauster could not read the result. If the read before the update fails, Clauster does not run the update and shows the error.
  • Install and update never accept a marketplace command for you. Some marketplace entries install a plugin by running a command, or fetch it with a headersHelper command. Claude Code shows that command and asks before it runs it. Clauster never passes -y or --accept-command, so Claude Code refuses the install and the tab shows the error. To install such a plugin, read the command and run claude plugin install from a terminal on the host.
  • Enable and Disable can refuse a plugin that already has that state. The badge on each row shows the merged state from all scopes. If the plugin is already enabled at the scope you chose, Claude Code refuses and names that scope. A plugin that the project enables cannot be disabled at user scope. To turn it off for yourself only, disable it at the Local scope.
  • Each marketplace row shows the source type and its location, for example github · owner/repo. A URL that carries a user name or password, such as https://user:token@host/repo.git, shows as ********.
  • Clauster masks credentials in what it reads. It masks every headers, env and MCP server args value, every headersHelper command, and every URL that carries a user name or password. Every other url is masked as the Hooks tab masks an http hook URL: each query value (for example ?token= or ?sig=), the fragment, and each path segment that looks like a token show as ********. The host and the plain query keys stay visible. A path segment or query key under 20 characters is not masked if it has fewer than 8 letters and digits, or only letters, or only digits. Do not put a credential there. This applies to the marketplace list, to the marketplaces that a scope declares (extraKnownMarketplaces), and to the MCP server definitions in the plugin list. A masked value is never written back. A value that is not an http, https, ws or wss URL, such as git@host:owner/repo.git, shows as stored, or as one ******** if it holds ? or #. A token in the path of such a value is not detected. Marketplace add refuses (422) a source that holds ********, for example a masked URL copied from the list. Type the full URL.
  • The Settings tab masks extraKnownMarketplaces in the same way. If you save the Raw JSON with a masked value unchanged, Clauster keeps the stored value. An args list shows as one ********, so you keep it whole or type the full list again. Clauster refuses the save (422) if a masked value can no longer be matched to its stored value. This happens when you rename or move an entry or a header that holds one. It also happens when you delete, reorder or edit an element of a list (such as a settings source's plugins) that holds one. Type the real values again, then save.
  • A masked credential stays bound to its marketplace URL. If you change any url in a marketplace entry on the Settings tab, or remove one, Clauster refuses the save (422) while that entry still holds any masked value, for example a headers value or a headersHelper. Any change to the text counts, including the letter case of the host or an added :443. This stops the stored credential from going to a new host. Type the credential again, then save. A url that shows a masked query value or path segment keeps the stored URL only when every visible character of it is unchanged. Any change to it, or a rename of its entry, refuses the save (422). Inside a list, such as a settings source's plugins, the element that holds the URL must also be unchanged and keep its place, and the list must keep its length. Type the full URL again.
  • The additionalMarketplaces spelling is read too. Claude Code 2.1.232 and later accept it as another name for extraKnownMarketplaces. When a file sets both, the canonical key wins, as it does in Claude Code.
  • Claude Code ignores marketplaces that a project declares until you trust the folder. This applies to the extraKnownMarketplaces entries in a project's .claude/settings.json and .claude/settings.local.json. Such an entry has no effect until the folder is trusted.

The tab does not offer these commands and settings:

  • plugin configure and install --config. Plugin options can be secrets, and Clauster does not put a secret in a command line.
  • install --marketplace, marketplace add --claudeai, marketplace add --sparse, disable --all, prune, and the authoring commands (init, validate, eval, tag, test).
  • Managed policy settings such as strictKnownMarketplaces, blockedMarketplaces and disableCommandPluginSources. Only managed settings can hold them, and Clauster never writes managed settings. Claude Code still applies them: a change that the policy blocks fails with Claude Code's own message.

YAML spellings that Clauster refuses

These rules apply to the frontmatter of subagent files and of SKILL.md files. The frontmatter is the YAML block between the two --- lines, which are called fences. If the frontmatter has one of these, Clauster refuses the whole save:

  • A NEL (U+0085), LINE SEPARATOR (U+2028) or PARAGRAPH SEPARATOR (U+2029) character. YAML 1.1 reads it as a line break, and YAML 1.2 does not, so the two see different fields.
  • The text --- anywhere before the closing fence, also inside a value or in quotes. Claude Code ends the frontmatter at the first ---.
  • An alias (a *name reference) to a node that contains it, such as a: &a {<<: *a}.
  • A nested value that YAML 1.1 and YAML 1.2 read differently. Examples are async: yes, timeout: 1_000 or timeout: 010 inside hooks, and DEBUG: yes inside an MCP server's env. Other examples are 1:30, 0b101, 1e3, 0o17, and a tagged value such as !!int "10", which the two read differently. Write true, false or a plain decimal. If the value must stay text, quote it.
  • A # with no space before it, right after a quoted value or a bracket, such as "a"#b, [x]#b or [a,#c. YAML 1.2 refuses it, so Claude Code reads a changed copy of the frontmatter, or none of it. Put a space before the #.
  • A lone carriage return (CR) that is not part of a CRLF line ending.
  • A quoted value that goes on to a line that starts at column 0. Indent the next line.
  • A key that appears twice in the same mapping. This includes two spellings that one YAML version reads as the same key, such as 1 and 01, or null and ~, and two << merge keys in one mapping.
  • A tab inside a plain value or after it, such as a then a tab then b. YAML 1.2 accepts it, but Clauster's parser does not. Use a space.

Some frontmatter is not valid YAML, but Claude Code still reads it, and so does Clauster. When the first parse fails, Claude Code parses a changed copy of the frontmatter. In that copy, a top-level key: value line gets its value in double quotes if the key has only letters, _ and -, and the value holds a YAML symbol such as [, {, #, or a colon and a space. A value that is already quoted or is a flow list such as [Read, Grep] stays as it is. Each tab at the start of a line becomes two spaces. Clauster reads the same copy, so it checks the values that Claude Code sees in the known cases. For example, argument-hint: [filename] [format] saves, and its value is the text [filename] [format]. The editor does not remove fields on load from a file that Claude Code reads through this copy.

A file that is not valid YAML even after these changes is refused. One example is a bad line that is indented under another key. Another example is a line in a file with Windows (CRLF) line endings, because Claude Code does not change those lines. Clauster also refuses some files that YAML 1.2 reads but its own parser does not, because it cannot read the values the same way. The examples are a file that uses one anchor name twice, such as &t on two values, an anchor name with a dot or a non-ASCII letter, such as &d.1, a list item that starts with :, such as [:a], and a tab between a value and a comment, such as Bash, a tab, then # note.

What a skill save writes

A skill save writes only the files that it sends. The Skills editor sends SKILL.md alone. So a save replaces SKILL.md and keeps every other file in the skill directory, for example scripts/ and reference files. The kept files stay byte for byte as they were. Clauster removes files from a skill only when you delete the whole skill.

On Linux and macOS, the kept files and directories also keep their modes and their group, with these changes:

  • Clauster clears the setuid and setgid bits. A directory keeps its sticky bit.
  • The owner of a directory always gets read, write and search access, so that the next save can remove the old copy.
  • The skill directory itself never gets group or world write access.
  • If you are not a member of the stored group, Clauster clears the group bits. It never gives them to another group.

While Clauster builds the new copy, every directory in it is private to the owner. Clauster sets the final modes only as the last step before the new copy replaces the old one. Clauster does not keep the file owner, access control lists, or extended attributes.

On Windows, Clauster keeps no modes. The new copy gets the access rules of the skills directory that holds it, also while Clauster builds it.

Clauster refuses the save and writes nothing in these cases:

  • The skill directory holds a symlink, or an entry that is not a regular file or a directory. Clauster does not follow a symlink inside the skill directory, and it cannot keep one without following it. Replace the symlink with a regular file, then save.
  • Clauster cannot read a file or a directory that it must keep, or one of them changes while Clauster copies it.
  • A sent path is a directory in the stored skill, or it is inside a path that the stored skill holds as a file.
  • A sent path names a stored file under another spelling, and Clauster cannot prove which file it is. Examples are a case variant of a file that has a hard link, or a Windows short name such as LONGNA~1.MD. Send the file under its stored name. On macOS and Windows, a plain case variant such as RUN.sh for a stored run.sh replaces that file.
  • The kept files and the sent files together are larger than 2 MiB, the size limit for one skill directory. Clauster never drops a file to make the skill fit.

Skill frontmatter checks

The Skills editor checks the frontmatter of SKILL.md before it saves the file. The fields are those of the frontmatter reference. The editor accepts every value that Claude Code 2.1.318 reads for that field, including a value that the reference does not list. Version 2.1.318 is the version that these checks were last compared against. Clauster refuses a value that Claude Code rejects or ignores, and it then writes nothing. Clauster never runs a hook command or a skill script from this editor.

  • Every field is optional. A SKILL.md without frontmatter is also valid: Claude Code reads the whole file as the skill's instructions. Without a description, Claude Code uses the first non-empty line of the instructions.
  • Clauster refuses a file that opens a --- block but never closes it. Clauster also refuses a fence that only Claude Code can read, for example a fence with a no-break space after ---. Put each --- alone on its line.
  • disable-model-invocation, user-invocable, background and fallback accept true and false. They also accept yes, no, on, off, 1 and 0 in any letter case. A user-invocable: line with no value hides the skill from the / menu, because Claude Code reads it as false.
  • allowed-tools, disallowed-tools and disallowedTools accept a space- or comma-separated string or a list of strings. If disallowed-tools is set, Claude Code ignores disallowedTools. So Clauster refuses the two together.
  • paths accepts a comma-separated string or a list. arguments accepts a space-separated string or a list of names. Clauster refuses an argument name that is only digits.
  • argument-hint, when_to_use, agent and version accept text, a number, true, false, or a list such as [issue-number]. Claude Code shows that list as issue-number. Clauster refuses a mapping. The field is when_to_use. Claude Code does not read when-to-use.
  • effort accepts a level name in any case, the alias med, or an integer. It accepts these inside a one-item list too, such as [high].
  • model accepts any alias, any model ID, or inherit. context accepts only fork. shell accepts bash or powershell in any case.
  • name is the command name. It can differ from the folder name and can hold single spaces. Clauster refuses a name that Claude Code cannot show. Examples are a hidden or direction-changing character, two spaces in a row, a space at the start or end, and < or >. The limit is 256 UTF-16 units, so an emoji counts as two. Clauster also refuses a name with a combining mark, even where Claude Code shows it.
  • Clauster checks hooks with the same rules as the Hooks tab and as subagent frontmatter hooks. So it accepts every documented hook event, hook type and field, and it refuses any other value. Claude Code drops a bad entry under most events and keeps the others, but Clauster refuses the save instead.
  • Clauster also refuses hook definitions outside hooks, because Claude Code then loads the skill with no hooks and no allowed-tools. A hook definition is a PreToolUse or PermissionRequest key, or a matcher group (a matcher and its list of hooks entries). Clauster looks for them at the top level and up to three levels into another field. It does not look into metadata, mcpServers or lspServers, because Claude Code does not.
  • metadata must be a mapping. created_by and improved_by are fields that Claude Code uses for its own records, and they accept only dream-proposal. version, fallback and disallowedTools are not in the reference, but Claude Code reads them, so Clauster checks them as above.
  • Clauster saves license, compatibility and every other field as written. The nested-value rule in YAML spellings that Clauster refuses still applies to them.

Clauster reads YAML 1.1 and Claude Code reads YAML 1.2. If a field means something different in the two, Clauster refuses it and names the field. For example, description: yes is the text yes to Claude Code. effort: 010 is 10 to Claude Code but 8 to Clauster. Quote the value, or write it as a plain number. Clauster accepts user-invocable: yes, because both read it as true.

If you open a SKILL.md that holds a field whose value Claude Code ignores, the editor can remove that field from the text. Examples are shell: zsh and effort: banana. Claude Code treats such a field as if it were not there. The removal does not change what the skill does. The editor then shows a note above the text. The file on disk does not change until you save.

The editor removes fields only if all of these conditions are true:

  • Every problem in the file is such a field.
  • Each of those fields holds a single value, or it is a metadata value that is not a mapping.
  • No field has a YAML tag that Clauster cannot read the same way as Claude Code, such as !!bool "true".
  • The frontmatter is a plain block of key: value lines, each field appears once, and no field is indented or comes from a << merge.

If one of these is false, the editor shows the file as it is, and Clauster refuses its save. The error names the field. Two other cases are never removed, because Claude Code acts on them. The first is a hooks value that is not a mapping and not empty: Claude Code then also drops allowed-tools. The second is a disallowed-tools value next to disallowedTools: it still hides disallowedTools.

Skill visibility

The Skill visibility panel on the Skills tab edits the skillOverrides key in the settings file of the scope: ~/.claude/settings.json at User scope, .claude/settings.json at Project scope, and .claude/settings.local.json at Local scope. The key tells Claude Code how to list each skill. A skill that has no key is on.

Value Effect in Claude Code
on Claude Code lists the skill with its description.
name-only Claude Code lists the skill without its description.
user-invocable-only Claude does not see the skill. You can still run it with its / command.
off Neither Claude nor you can use the skill.

The panel shows one row for each skill folder at the scope, and one row for each key that is already in the file. At Local scope, the rows show the skill folders of the project. A key that matches no folder gets a no skill folder badge, so you can see it and remove it. A stored value that Claude Code does not read shows as Not valid. Clauster refuses a save until you choose a value for that row.

To change the visibility of skills:

  1. Open Manage Claude Code config, select the scope and the project, then open the Skills tab.
  2. Choose a value for each row. To remove a key from the file, choose No override.
  3. To set a skill that has no row, such as the bundled skill doctor, type its name in Add a skill name, choose a value, then select Add.
  4. Type the scope name, then select Save visibility.

A save replaces the whole skillOverrides map with the rows that have a value. It does not change the other keys in the settings file. If the file changed after the panel loaded it, Clauster refuses the save and writes nothing. Close and reopen the panel to load the file again.

A key is the name of a skill, as Claude Code shows it. The key can be a frontmatter name, the name of a bundled skill such as doctor, or a name with a colon such as anthropic-skills:pdf. Clauster refuses an empty key, the key __proto__, and a name that Claude Code cannot show. The refusal names the key, and Clauster writes nothing. The panel sends each name as you typed it, so a space at the start or the end is part of the name.

Troubleshooting and limits

Symptom Why What to do
A field isn't in the editor Excluded by design (secret / auth / bind / structural / code-executing) Edit clauster.yml on the host; see What it deliberately won't edit
Save rejected: config changed on disk (409) The file was edited externally (or by a concurrent save) after the editor loaded it Reopen the editor and re-apply your change
Save refused with a validation error (422) The value fails full-config validation — including the fail-closed auth check Fix the value; the same rule would have refused it at startup
Advanced settings ask for a password you don't have Step-up re-auth requires a password even when login uses another mechanism Set one with clauster hash-password
No Advanced section / no wrench button config_write.enabled is off (the whole surface 404s) Enable it in clauster.yml — deliberately not web-editable
A saved change has no effect Saves never live-reload Use Restart Clauster in the Configuration modal
A subagent has no description and won't edit It is built-in, or a plugin owns it — the Source badge says which Built-in: nothing to do, there is no file. Plugin: change the plugin, not Clauster
A plugin install or update fails and the message names a command The marketplace entry runs a command, and Clauster never accepts one for you Read the command, then run claude plugin install from a terminal on the host
Enable or Disable fails with "is already enabled" or "is installed at project scope, not user" The badge is the merged state, and the chosen scope already has that value or cannot override it Pick the scope that the message names, or use the Local scope to override a project setting for yourself
Removing a marketplace returns 404 with "is not declared in user settings" A different scope declares it Switch to the scope that declares it and remove it there
A Settings save returns 422 with "Claude Code reads … only from" The file holds a key (or a true value) that Claude Code ignores at this scope Remove the key (in Rows mode or Raw JSON), or save it at the scope that the message names. For a true value, set it to false

Need to recover an earlier config? The five most recent pre-save snapshots sit next to the file as clauster.yml.bak-* — copy one back over clauster.yml and restart.